You must be logged in to rate content!
5 minute(s) of a 14 minute read
6-27-2017
DIYauto.com Bros Wrenching!
6/27/17
We got this car for a week or two, with a budget of ~$600 we're gonna see what we can come up with. Here is some photos.
Needs new front bumper and hood
New fender
Most of the hubs are toast
Window trim, don't know how lucky we will get his these
Rest is pretty much road rash, we're gonna see what's at the local junkyards
6/28/17
Decided to give her a wash and start a list, here's an engine before/after
Steve started to see what we would need to buy to do basic engine maintenance.
Remove 2 bolts from engine cover 10mm
To check the plugs we had to remove the manifold
6/29/17
Gonna start looking at the suspension, brakes etc on the car. Add needed parts to the list and these sweet hub caps!
Start by blocking some tires, I did both rears. Bring out your jack and stands, these lugs were 21mm.
Jacked it up and took a look. We have new front pads, looks like we will need tie rod ends, cv boots etc look alright.
Knarley bro! 4-lug to 5-lug conversion!
Started the rear, went through the rest of the wheels, finished up the list
I checked out the air filter which needs to be replaced here are some photos.
