Budget racing seats write up. *pics* by camaroextra

By diyauto
( 2 )

3 minute read

Budget racing seats write up. *pics* 


Compliments of camaroextra @ http://ls1tech.com


8-4-2006

I got these off of ebay, they were $298 shipped to my door and came with universal sliders. These are kinda "ricer" seats, they use 12MM bolts! If you dont like them, well I dont remember asking.


I was extremely pleased with the quality of them, they are light and comfortable, I love the fabic, it really breathes.


I managed to get these in with no welding and minimal fabrication. The tracks on these seats are exactly the same width apart as factory!


I grinded out the rivets on the bottom of the original seat, and pulled off the factory floor brackets, then measured and drilled holes in them to accept the universal sliders that come with the seats. I can do a more detailed write up at some point if someone needs me too.


I managed to get the drivers side to sit nice and low, Im 6' and the drivers side feels the exact same height as the factory seat. The passenger seat is about 2" higher due to the way the factory seat mounts are located, I didnt wanna go cutting up the floor pan, but you cant tell when you sit in the passenger side, it doesnt feel too high.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


I also put a bucket seat in this lightning. It was much easier. (thats not me in the pic)


Click the image to open in full size.


Dont do this to your hand, I just spend all night in the emergency room. that **** is deep, sry for the crappy pic but I didnt feel like taking a bunch.


Click the image to open in full size.



Comments