C5 Build Thread by dasorcha21

By diyauto
( 4 )

13 minute(s) of a 25 minute read

12-16-2010

C5 Build Thread 


Compliments of dasorcha21 @ http://ls1tech.com


12-16-2010

this is my current build taking place i am copying from another forum here.


Well bout time for a build thread.. I will be talking/doing this build thread in 3 phases.  


1. The current build


2. The Maximizing the NA portion of the build and fixing any issues


3. The Nitrous part of the build


Im sure I will forget some **** etc…. but the bulk will be there.


First off I would like to give several people some some recognition.

First and foremost ….CBI, Country Folk, Ol boah, Android bicentennial man Chad Barton a much OVER DUE THANKS!!!!!!!!!!!!!! For helping me on this build and helping me build an awesome setup.

2. Josh Boooooomer for an awesome tune with no issues… car Cold starts and works excellent!

3. Bennnies from PURRRRRRRRR – for hooking me up on parts and going the extra mile on ****!


Phase 1

(fyi – this build has to be sometype of record as we finished it in 1 week lol)


Build Details

418ci Ls3 – 4.080 bore

Diamond gas ported nitrous pistons

Eagle 6.125 H-beam

Eagle 4” crank

LS7R Cam

Morel Link Bar lifters

PRC CNC ported and milled LS3 heads

Comp .675 Max lift springs

Fast 102

NW ls3 102 TB

ASP 25% UD pulley

Kooks 1 ¾ headers (the exhaust ports on the heads are bigger than these primaries)

Titanium z06 exhaust (bypass mod)

Centerforce DFX (biggest POS)

85mm Maf


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


The car was dynoed with 200 miles on the setup so wasn’t quite broken in yet.. we will recover this in phase 2




Click the image to open in full size.


I will Begin Phase 2 tommorow with explaining the issues and the fixes


PHASE2:


Since I Purchased the car it had 1 3/4 kook’s header and a brand new Centerforce DFX. We opted to just roll with what we had and take the build in stages. 2 huge problems arose with this decision. First off the 1 ¾ primaries are smaller than the exhaust ports on the heads themselves Making for a huge restriction especially on an NA setup. Secondly, the clutch…. Sigh…. Has to be the biggest frustration and annoyance I have with the car. It would not let me shift above 4500rpm among other things (seems to be a known issue that the centrifugal weight system tended to bend the fingers on the PP during high RPM driving. I had purchased a Tick performance Master Cylinder to fight this issue to no avail. Regardless the purpose of Phase (2) is fix the current issues and to increase the power of the NA setup to reach our goal. 

The Fixes- I have already purchased and installed the Tick Master Cylinder. Now….. In Comes The RPS BC2 after giving it a good look over as I was trying to choose between the Mcleud RXt and RPS BC2 CBI and I recited the motto to this build and the overall idea we have practiced throughout it. “ RELIABILITY COST MONEY, SO WE BUY THE BEST **** WE CAN AND DEW WURK SON!” 

Now for the Headers we opted to Go to 1 7/8 KOOKs headers as well as Porting and massaging out the 102 Fast as there is soooo much to be had in a high HP NA build from a good port job and big headers LET THAT BITCH BREATHE. Lol.. I will be posting results after these babies go on this week!


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.


Ok so Phase 2 is done
With the addition of the new intake and extremely light clutch the car is an absolute monster. throttle tip in and response is just crazy it is a rev machine. the clutch itself is amazing feel great when shifting and you have an awesome feel for clutch disengagement and contact point. i will be going back to the dyno end of week to see where i stand before the spray.

Phase 3 is all mounted up and ready to be wired.

we went ahead and decided on a plate kit and will probably be adding a DP kit as a second stage to the system. the system consist of a 102mm plate kit and 2x 10lbs nitrous bottles and 2x Comp 4500psi Nano System along with a -6 to the front and a Fuel Standalone unit. this setup will be good for plenty of juice to both systems.

Feast your eyes below at the completed Fast porting it will def be awesome!


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

The RPS BC2 being installed.


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Phase 3 pics

how many bottles ya need lol


Click the image to open in full size.

Click the image to open in full size.

engine


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

new nitrous valves which not only flow alot more but also allows to monitor bottle pressure without having to open the bottle. it also has 3 ports (nano, nitrous out, blow down) and a guage.


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.


In an effort to squeeze every last bit of na power out of the setup we have came to the conclusion that the current intake on the car will just not due. you can monitor or somewhat see if u have an intake side restriction by looking at the kpa during a full pull and seeing if it lumps over etc... and at what point during the rpm band. the current intake track consist of a hogged out fat 102 and 102 tb to only be restricted by a k&n intake and 85mm maf. we will be swapping these components in favor of a true 4in pipe from the TB all the way to the filter itself and doing away with the maf and converting to full SD mode. If we cant get good driveability out of it i will purcharse a ls7 card style maf that can adapt to any size pipe and give better resolution. to be able to use a 4" pipe in a c5 you have 2 optons either by a cowl hood with enough clearance or drop the radiator and lean it back some. we opted for option 2 as i have done it on the my red c5 and it was rather painless quick and easy to do as well as cost effective. If everything goes well over the weekend we will be paying a visit to the dyno to see what we can muster up.

here is my current intake setup


Click the image to open in full size.

here is what we plan to do


Click the image to open in full size.


So more updates almost there... cant wait!

So i was able to swap out the intake out rather easily. I took a couple of pictures to show the differences of the intake path and the inside flow path of both.

This first picture really shows how bad the first intake was as it was not smooth and had a few humps going from big to small and back to big. These inconsistencies cause air turbulence further hindering performance. also keep in mind this intakes ID was well below 3"


Click the image to open in full size.

Also comes the fact that the intake dam near flattens like a pancake further reducing potential flow.


Click the image to open in full size.

In comes the new CBI intake it is 4" from the TB all the way to the Air filter
please notice there is just a small bend and the pipe maintains the same diameter throughout the whole path.


Click the image to open in full size.


Click the image to open in full size.

And here are the final results of the intake project
(please keep in mind i will be getting everything under the hood either powder coated black/painted black( ie. fast)
made a quick spin and the a/f is reading a bit on the lean side now which def shows were getting a good amount of air in there now.
we are very excited for monday for the final tune and dyno to see were we land.


Click the image to open in full size.


Click the image to open in full size.


And so this is where we are currently at in the build.

We did some tuning tonight on the car and it absolutely did not like going to SD so after much deliberation we have decided were going to change the intake setup again and not look back as its the baddest one currently out.

We opted to go with the new Halltech Killer Bee II
-it sports the biggest K&N Filter specifically made for halltech
- inlet is 107mm and has a built in velocity stack
- outlet is 102.5 (which maches up perfectly with out 102 TB
- comes with conversion harness and Ls7 MAF card style



Below is a pic of it and all its components as we would have to purchase the maf harness etc.. it just makes more sense to buy the whole package and keep it moving.


Click the image to open in full size.



Comments

Love Vettes always a head turner

Posted by Diggymart on 4/21/20 @ 2:34:53 AM