Battery Removal for 2008 Sebring by saltydog

By diyauto
( 2 )

3 minute read

Battery Removal for 2008 Sebring 


Compliments of saltydog @ https://www.allpar.com


1-5-2013

Jack the car up and remove left front wheel....



Remove ground cable using 15mm socket.....



Using a 7mm socket, remove the screws that hold shield in place....



Remove all six push pins....



Using a 13mm socket remove lower bolt & using a 10mm socket loosen the terminal connections...



Then move bracket to this position...



Using a 13mm socket, remove battery hold down...



Install new battery and reinstall all that was removed..



And a full Wax just because black beautiful!



And a full Wax just because black beautiful!



1-5-2013

Also, if you live in the rust belt, I would recommend painting or using some anti rust spray. Too me this seems like there is not much protectant on the tray and surrounding area.


1-24-2013

As Doug mentioned, it possibly could be done by cranking the wheel to the right, but this is more involved than pervious J cars. I like to have room to work and I don't take chances on scratching or braking anything.

The tires are Generals and love them! So much better than the original Brigstones. Better handling as we



Comments