1275 Gt Resto. Better Than What We Usually Start With! by pickupmad87

By diyauto
( 2 )

5 minute(s) of a 38 minute read

8-25-2013

1275 Gt Resto. Better Than What We Usually Start With! 


Compliments of pickupmad87 @ http://www.theminiforum.co.uk


8-25-2013

Alrite Guys. Time for a new Project!! I know we havent finished the pickup yet butthis came up at a price that we couldnt refuse!!! so lets begin. as the title says its alot better than what we usually start off with which is a bonus. heres the beast.

IMG_20130816_184302_zps79700356.jpg 

 and heres some pics of the areas that need attention. Front floorpan needs repairing, slight repair on the inner wing and slight repair on the inner sill at the front drivers side.

20130825_130602_zps97a189d1.jpg 

 Very slight repairs to the wheel arch and the rear valence closing panel on the drivers side.

20130825_130622_zps2f952d48.jpg 

 Rear valence needs panel beating straight.

20130825_130634_zps9e19c8eb.jpg 

 Wheel arch passenger side needs slight reapir.

20130825_130650_zpsa2f6b681.jpg 

 Floorpan repair, inner sill and slight repair to innerwing needed.

20130825_130712_zps17a4151f.jpg 

 And we need to get rid of this hideous thing!!! More on that next!

20130825_130721_zps71e9b470.jpg 

 seeing as we have got a "spare" mini in the back lane, we have decided to do a roof swap. so alot of carefull measuring is in need. all measurements and points of measuring have been marked off with marker pen.

20130825_132445_zps5dcc01b3.jpg 

 20130825_132438_zpsef992828.jpg 

with this done we welded in some bracings to keep the door gaps and to stop the shell from twisting.

20130825_130729_zpsbae70b63.jpg 

 with the bracing in and checking of all mesurements we transfered the measurements onto the spare mini! with this doneit was time to get the spotweld drill and grinder out!  off with its head!!

20130825_150611_1_zps05be8db4.jpg 

 20130825_150304_zpsba04022d.jpg 

20130825_150411_zpsd381635f.jpg 

 to maintain strength when welded back together all he joints are staggered by 100mm. 

20130825_154319_zpsd9216c8a.jpg 

 with all the cuts finished, a very liberal coat of weld through primer was applied to all the surfaces.

20130825_155615_zps20a11393.jpg 

 with all of this completed it was time to do the same to the "spare" mini. 

20130825_155517_zps39dfcde3.jpg 

 20130825_151834_zpscd058840.jpg 

and again weld through primer applied to all the internal surfaces. 

20130825_155507_zpsc7345760.jpg 

 dont worry about the "spare" mini were keeping the rest of that instock for my van project when i get hold of one! now it was time to mate the two together!   

20130825_163233_zps7f1d0111.jpg 

 we went round measuring off our datums we had set and tacked the two together. it got a bit late in the day by the time we got to this point, so we will finish welding it tomrrow. before we knocked off we thought we would take the oversill that had been put on, on the drivers side.luckily it had been put on so badly it was easy to take off! look theres the original sill. this winds me up something kronic! 

20130825_170943_zps7695fd26.jpg 

 and this is why you dont use the dredded over sills.

20130825_170958_zps764ffe8e.jpg 

 look at all the moisture they hold in!! thats it for today, should be updating more tommorrow.



Comments

Great build and color!

Posted by Diggymart on 4/16/20 @ 3:08:29 PM