You must be logged in to rate content!
2 minute read
Removing Radio Door and Trim Panel for S2000
Compliments of Kodokan_4 @ www.s2ki.com
I needed to remove the radio door and trim plate so they can go to the CF shop.
Just thought some of you might like to see how easy it is:
First, put the shift lever in reverse, and cover the lever and the console with a folded t-shirt or other padding. Pull firmly one one side of the radio door, until the lower clip releases. Do the same to the other side. Then pull a little harder on each side, until the middle clip releases.
When the middle clip on the right side releases, a small space will open up near the top- insert the tape-covered screwdriver here:
Cover the surrounding parts with tape, and don't pry on anything. Use the tip of the screwdriver to push the backside of the plastic forward (it comes out very easily):
Padded screwdriver:
To remove the radio door from the trim plate, use something like this to push out the retaining pins (a coathanger will do). Remember to protect the surface with tape:
Parts ready to go:
-Pete