My RX7/Rotary projects... formerly My Blk base build up.. by Herblenny

5 minute(s) of a 569 minute read

Worked on few this over the past few days..

Cluster surround, fiberglassed and process of smoothing out.

making my own MS R-Spec signal lights

Studded everything and shorten bolts so I could put FD chrome nuts and bolts for the LIM. 

This was from about 3-5 FD engines

And starting to test fit everything and such..

9-10-2012

some of the goodies that are going in in this car..

Aluminum rack..

Carbon Shaft.

FEED trunk thingy in carbon

9-13-2012

This is Atomic. I need to thank Chip from Chipmotorsports for selling his extra one.

more update...

I finally took some time to work on the rear diffs of the FD RX-7s.

Here are some pics of the diffs.

Stock vs Kaaz

After cleaning the case, sanding it down, and re painting it with epoxy paint,.. I put the new covers on.

Stock vs. Greddy higher fluid capacity cover.

9-19-2012

Sept 16th, 2012 - Little bit more update... 

Took some time getting the transmission painted and such.. Some color scheme.

and becoming a master of taping

Also, plugged the oil metering hole

and another angle of the painted diff..

Sept 19th, 2012 Updates from past 3 days..

I had the rotor hats made for the Disc Brakes Australia rotors and got them refinished in similar black.

Cleaned up and repainted the RZ calipers.

I also replaced the diff bushings with Powerflex bushings.