Welcome to our site! Look around and hope you enjoy!
-
DIYs
-
Air filter change
Category: Engine
6/29/17 Start by opening the hood and finding the two latches that hold the air box in. Use a flat head to pry the latches up. Pull the box up and remove the air filter, replace with new unit. Do the reverse.
-
Jack/Remove wheels
Category: Brakes
Start by securing you vehicle in place. I put two sets of bricks behind both rear tires, and moved them as I moved around the vehicle. Grab your tools, we had just did a tire rotation a month ago so I knew we didn't need a deadblow or rubber...
-
Inexpensive Front Strut Brace DIY by cuttyman9
Category: Suspension
Inexpensive Front Strut Brace DIY Compliments of cuttyman9 @ http://5thgencelica.com 1-7-2015 Cheap front strut brace So I found a cheap and easy front strut bar that isn't garbage like the stock one and used in conjunction it is pret...
-
Aluminum Wrap Dashboard and Passenger Fascia like Mulliner by sonicd0012
Category: Interior
Aluminum Wrap Dashboard and Passenger Fascia like Mulliner Compliments of sonicd0012 @ www.6speedonline.com 4-1-2013 So one day I sat in a 2013 Mulliner with the Aluminum dash and man does it look killer so i decided to put in my 2005. As...
-
Replace broken rubber shift **** assembly by sonicd0012
Category: Driveline
Replace broken rubber shift **** assembly Compliments of sonicd0012 @ www.6speedonline.com 4-1-2013 My shift **** has a broken rubber piece that has disconnected and fell exposing the shift assembly. Bentley stated that this piece is not a...
-
-
Builds
-
My 93 Burnout Kit Mini Build pic thread... from thrashed to now by gemma
My 93 Burnout Kit Mini Build pic thread... from thrashed to now Compliments of gemma @ www.rx7club.com 10-2-2010 So I picked my car up 3 years ago on the cheap off of ebay, but it was completely trashed. Engine blown, cheap ebay t...
-
The Sentra fixup
DIYauto.com Bros Wrenching! 6/27/17 We got this car for a week or two, with a budget of ~$600 we're gonna see what we can come up with. Here is some photos. Needs new front bumper and hood New fender Most of the hubs are toast ...
-
V8 1973 VW Beetle Project by V8 Super Beetle
V8 1973 VW Beetle Project Compliments of V8 Super Beetle @ http://www.hotrodders.com 1-2-2008 Hello all! I'm in the process of building a V8 Bug out of my 1973 VW Super Beetle . I know this is possible because it's been done before. I'...
-
Building a 1960 Mercury Park Lane convertible by mercs4fun
Building a 1960 Mercury Park Lane convertible Compliments of mercs4fun @ http://ford-mel-engine.com 2-22-2014 Hello, as this is my first post here on this forum I would like to say that even if I am new here, I am not at all new to MEL c...
-
WarShrike's Project Thread by WarShrike
WarShrike's Project Thread Compliments of WarShrike @ http://www.fullthrottlev6.com 9-28-2010 Other posts: T-56 Tech Article: LINK T-56 Swap: LINK Clutch/Flywheel options for big power: LINK Wheels & Tires...
-
-
Articles
-
BMW-specific E39 acronyms (list and definition) by bluebee
BMW-specific E39 acronyms (list and definition) Compliments of bluebee @ www.bimmerfest.com 5-10-2010 BMW E39 glossary of terms, abbreviations, acronyms, slang, and oft-used brand names: (AFAIK, this is the most complete list on the plane...
-
Bluebee E39 (DIYs with lots of photographs)
Bluebee E39 (DIYs with lots of photographs) Compliments of Bluebee @ www.bimmerfest.com 2-10-2011 Hi, I'm Bluebee. I live in California. My goal is always to search, ask, listen, and then add value to every thread I can. I feel most (but not al...
-
Second Dutch 95 meeting/ 22 October 2011/ Drachten by melle
Second Dutch 95 meeting/ 22 October 2011/ Drachten Compliments of melle @ http://www.saab-v4.co.uk 8-31-2011 Last year Syb Rozendal and I organised the first Dutch 95 meeting. We managed to collect 7 95 V4's and a bunch Saabs of other mo...
-
Bath Festival of Motoring – 18 & 19 June 2016 by melle
Bath Festival of Motoring – 18 & 19 June 2016 Compliments of melle @ http://www.saab-v4.co.uk 6-7-2016 Anyone exhibiting their V4? Or just visiting? I'm not sure what day I'll be going yet (as a visitor), if others are planning...
-
Proven spare parts cross references by melle
Proven spare parts cross references Compliments of melle @ http://www.saab-v4.co.uk 2-7-2015 Proven spare parts cross references – Please post additions in this thread or PM me and I will update this post. Part – Saab part nu...
-
-
Reviews
-
Second Dutch 95 meeting/ 22 October 2011/ Drachten by melle
Second Dutch 95 meeting/ 22 October 2011/ Drachten Compliments of melle @ saab-v4.co.uk 8-31-2011 Last year Syb Rozendal and I organised the first Dutch 95 meeting. We managed to collect 7 95 V4's and a bunch Saabs of other models. This y...
-
Bath Festival of Motoring – 18 & 19 June 2016 by melle
Bath Festival of Motoring – 18 & 19 June 2016 Compliments of melle @ saab-v4.co.uk 1-7-2016 Anyone exhibiting their V4? Or just visiting? I'm not sure what day I'll be going yet (as a visitor), if others are planning to go it wo...
-
DANKFEST III !!! by flawlessfitment.com
DANKFEST III !!! Compliments of http://www.flawlessfitment.com 8-25-2013 DANKFEST 2013!!! Well, it was dank to say the least. We've been to Dankfest since its conception and to see it grow the way it has is really awesome! Hoodstatus, Sneed's ...
-
Daily Beaters on Air by flawlessfitment.com
Daily Beaters on Air Compliments of http://www.flawlessfitment.com 9-24-2013 I can never understand why there's a faction of people who are against air ride. This whole Static VS Bags argument really doesn't make sense to me. If yo...
-
Vape & Scrape Event Recap by flawlessfitment.com
Vape & Scrape Event Recap Compliments of http://www.flawlessfitment.com 1-26-2014 My friend Aaron has been into vaping for some time now and was a regular at a local vape shop in Winston-Salem. He got with the owners of the shop and ...
-
- Images
- Videos
-
Library
- Radio Aux Installation Part 2
- Radio Aux Installation Part 1
- Bus System Troubleshoot
- Fuel Tank Breather Valve
- Misfire Test
- Misfire Checklist
- Window Regulator Remove & Replace
- Troubleshooting the ZF 6HP26 Mechatronics Unit E-shift
- 6 Speed Mechatronic Solenoid Kits
- 6 Speed Transmission mechatronic sleeve replacement
- Oil pan Replacement
- Valve Block Additional Info
- Valve Block Wiring Diagram
- Dynamic Drive
- Valve Block
- Transmission Oil Change
- Transmission Sleeve Replacement
- Vehicle Inspection
- Ignition Coil
- Ignition Coil Replacement
- Service Data
- Torque Spec
- 1971 SAAB 96 Wiring Diagram (RHD)
- 2006 BMW 650i Front Bumper Removal
- 6 Series Earthquake speaker installation
- BMW 650i Brake Pad Change DIY by Yorgi Part2
- BMW 650i Brake Pad Change DIY by Yorgi Part1
- Exploded parts from 1960 - 1964
- Rules for Buying Corrados
- Vin Decoder
-
Activity
Activity For Jul 18, 2017
-
diyauto5 days ago- Added a rating of 5 to build titled MAP Stage 2 LR 2.4L Build by Blue91lx
-
diyauto5 days ago
- Updated the build titled MAP Stage 2 LR 2.4L Build by Blue91lx
-
diyauto5 days ago
- Deleted the rating on build titled MAP Stage 2 LR 2.4L Build by Blue91lx
-
diyauto5 days ago
- Updated the build titled MAP Stage 2 LR 2.4L Build by Blue91lx
Activity For Jul 14, 2017
-
diyauto1 week ago
- Deleted the forum thread New user
- Deleted the forum thread Why can we use custom essay writing carrier?
-
diyauto1 week ago
- Updated the user Gregory
Activity For Jul 12, 2017
-
diyauto1 week ago
- Updated the build titled My 93 Burnout Kit Mini Build pic thread... from thrashed to now by gemma
-
diyauto1 week ago
- Created a build titled My 93 Burnout Kit Mini Build pic thread... from thrashed to now by gemma
Activity For Jul 10, 2017
-
diyauto1 week ago
- Updated the field value for Model Years (Trim) on the trim Standard for the generation Passat B6, B7
-
diyauto1 week ago
- Deleted the forum thread Write My Assignment Services
-
diyauto1 week ago
- Updated the user assignment
-
diyauto1 week ago
- Added a rating of 5 to build titled LS1 Powered S14 by SicBastard
-
diyauto1 week ago
- Updated the build titled LS1 Powered S14 by SicBastard
-
diyauto1 week ago
- Added a rating of 2 to diy titled Head Gasket Installation - SR20DET by s14unimog
-
diyauto1 week ago
- Updated the DIY titled Head Gasket Installation - SR20DET by s14unimog
-
diyauto1 week ago
- Added a rating of 3 to diy titled Nissan 240sx Automatic to Manual Conversion by roushman90
-
diyauto1 week ago
- Updated the DIY titled Nissan 240sx Automatic to Manual Conversion by roushman90
-
diyauto1 week ago
- Added a rating of 5 to build titled 240sx Coupe Track Car by noname7198
-
diyauto1 week ago
- Updated the build titled 240sx Coupe Track Car by noname7198
-
diyauto1 week ago
- Added a rating of 3 to diy titled Key ring light Into s13 by locoluna825
-
diyauto1 week ago
- Updated the DIY titled Key ring light Into s13 by locoluna825
-
diyauto1 week ago
- Added a rating of 3 to diy titled Front 5-Lug Conversion by jaysgottaredtop
-
diyauto1 week ago
- Updated the DIY titled Front 5-Lug Conversion by jaysgottaredtop
-
diyauto1 week ago
- Added a rating of 3 to diy titled S13 Chuki Lip, Side Skirts, & Rear Valances by jaysgottaredtop
-
diyauto1 week ago
- Updated the DIY titled S13 Chuki Lip, Side Skirts, & Rear Valances by jaysgottaredtop
-
diyauto1 week ago
- Added a rating of 3 to diy titled S13 Hatch Center Garnish Lettering by jaysgottaredtop
-
diyauto1 week ago
- Updated the DIY titled S13 Hatch Center Garnish Lettering by jaysgottaredtop
-
diyauto1 week ago
- Added a rating of 4 to diy titled The DIY led gauge cluster thread by fueled by hate
-
diyauto1 week ago
- Updated the DIY titled The DIY led gauge cluster thread by fueled by hate
-
diyauto1 week ago
- Added a rating of 4 to build titled VQ35DE Into My S14 by Dorrifto
-
diyauto1 week ago
- Updated the build titled VQ35DE Into My S14 by Dorrifto
-
diyauto1 week ago
- Added a rating of 4 to build titled My DIY twin turbo build Gen 1 Viper - by AndyMac
-
diyauto1 week ago
- Updated the build titled My DIY twin turbo build Gen 1 Viper - by AndyMac
-
diyauto1 week ago
- Added a rating of 3 to diy titled The Side Feed Injector Thread for a Gen 1 Viper by AndyMac
-
diyauto1 week ago
- Updated the DIY titled The Side Feed Injector Thread for a Gen 1 Viper by AndyMac
-
diyauto1 week ago
- Added a rating of 3 to diy titled Built Some Solid Motor Mounts for my Gen 1 Viper by AndyMac
-
diyauto1 week ago
- Updated the DIY titled Built Some Solid Motor Mounts for my Gen 1 Viper by AndyMac
-
diyauto1 week ago
- Added a rating of 3 to diy titled Retro Kenne-bell Dual Quad street build by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Retro Kenne-bell Dual Quad street build by Jim Weise
-
diyauto1 week ago
- Added a rating of 3 to diy titled BOP 455 Rear seal Install- Step by Step by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled BOP 455 Rear seal Install- Step by Step by Jim Weise
- Updated the DIY titled BOP 455 Rear seal Install- Step by Step by Jim Weise
-
diyauto1 week ago
- Added a rating of 5 to diy titled 400/430/455 Block ID, Prep and Oiling mods by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled 400/430/455 Block ID, Prep and Oiling mods by Jim Weise
-
diyauto1 week ago
- Added a rating of 3 to diy titled Understanding Core Shift in the 455 block- why sonic checking is so important by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Understanding Core Shift in the 455 block- why sonic checking is so important by Jim Weise
-
diyauto1 week ago
- Added a rating of 3 to diy titled Engine break in prep and video by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Engine break in prep and video by Jim Weise
-
diyauto1 week ago
- Added a rating of 4 to diy titled Original SAE Conference BB handout booklet- scan by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Original SAE Conference BB handout booklet- scan by Jim Weise
-
diyauto1 week ago
- Added a rating of 3 to diy titled TSP Supercharged Triple Nickel by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled TSP Supercharged Triple Nickel by Jim Weise
-
diyauto1 week ago
- Added a rating of 3 to diy titled Oil Pressure Equalization line by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Oil Pressure Equalization line by Jim Weise
- Updated the DIY titled Oil Pressure Equalization line by Jim Weise
-
diyauto1 week ago
- Added a rating of 5 to diy titled Camshaft degreeing 101 by Jim Weise
-
diyauto1 week ago
- Updated the DIY titled Camshaft degreeing 101 by Jim Weise
-
diyauto1 week ago
- Added a rating of 5 to build titled SBB sheetmetal intake and more… by 87GN@Tahoe
-
diyauto1 week ago
- Updated the build titled SBB sheetmetal intake and more… by 87GN@Tahoe
-
diyauto1 week ago
- Added a rating of 4 to diy titled Electric power steering by Ae95/4agze
-
diyauto1 week ago
- Updated the DIY titled Electric power steering by Ae95/4agze
-
diyauto1 week ago
- Added a rating of 5 to build titled Project Cliff - The Cherry Red Thirty by stretch tech
-
diyauto1 week ago
- Updated the build titled Project Cliff - The Cherry Red Thirty by stretch tech
-
diyauto1 week ago
- Added a rating of 5 to build titled 'busavan by rustandoil
-
diyauto1 week ago
- Updated the build titled 'busavan by rustandoil
-
diyauto1 week ago
- Added a rating of 4 to build titled Mini VTEC in Holland by Renessy
-
diyauto1 week ago
- Updated the build titled Mini VTEC in Holland by Renessy
-
diyauto1 week ago
- Added a rating of 4 to build titled Volvo - Z-car Meets Zeemax by RED HOT
-
diyauto1 week ago
- Updated the build titled Volvo - Z-car Meets Zeemax by RED HOT
-
diyauto1 week ago
- Added a rating of 5 to build titled My Mini Resto by minimk1
-
diyauto1 week ago
- Updated the build titled My Mini Resto by minimk1
-
diyauto1 week ago
- Added a rating of 5 to build titled The Wifes Worst Nightmare 83 Full Resto by Minidarren83
-
diyauto1 week ago
- Updated the build titled The Wifes Worst Nightmare 83 Full Resto by Minidarren83
-
diyauto1 week ago
- Added a rating of 5 to build titled Project Trig - After 18 Months Away, Is Back In Town! by Mini 360
-
diyauto1 week ago
- Updated the build titled Project Trig - After 18 Months Away, Is Back In Town! by Mini 360
-
diyauto1 week ago
- Added a rating of 5 to build titled The 1991 Neon Restoration Once Again! by josh.evans
-
diyauto1 week ago
- Updated the build titled The 1991 Neon Restoration Once Again! by josh.evans
-
diyauto1 week ago
- Added a rating of 5 to build titled Project JetBLICK by JetBLICK
-
diyauto1 week ago
- Updated the build titled Project JetBLICK by JetBLICK
-
diyauto1 week ago
- Added a rating of 4 to build titled My Forced Induction Project by Grahamxx
-
diyauto1 week ago
- Updated the build titled My Forced Induction Project by Grahamxx
-
diyauto1 week ago
- Added a rating of 5 to build titled George's Minibusa by GeorgeMini
-
diyauto1 week ago
- Updated the build titled George's Minibusa by GeorgeMini
-
diyauto1 week ago
- Added a rating of 4 to build titled My 998 Turbo by coopdog
-
diyauto1 week ago
- Updated the build titled My 998 Turbo by coopdog
-
diyauto1 week ago
- Added a rating of 3 to build titled Mini City E Turbo by coopdog
-
diyauto1 week ago
- Updated the build titled Mini City E Turbo by coopdog
-
diyauto1 week ago
- Added a rating of 4 to build titled Race Car Back To Retro Daily by CobraV8
-
diyauto1 week ago
- Updated the build titled Race Car Back To Retro Daily by CobraV8
-
diyauto1 week ago
- Added a rating of 5 to build titled 92 City, My First Rebuild by big-jay
-
diyauto1 week ago
- Updated the build titled 92 City, My First Rebuild by big-jay
-
diyauto1 week ago
- Added a rating of 5 to build titled I Only Wanted The Wheels.... by 72clubman
-
diyauto1 week ago
- Updated the build titled I Only Wanted The Wheels.... by 72clubman
-
diyauto1 week ago
- Added a rating of 5 to build titled Greddy's build thread!! Better late than never!
-
diyauto1 week ago
- Updated the build titled Greddy's build thread!! Better late than never!
-
diyauto1 week ago
- Added a rating of 3 to diy titled Rearview Camera & DVD by Zyonara
-
diyauto1 week ago
- Updated the DIY titled Rearview Camera & DVD by Zyonara
-
diyauto1 week ago
- Added a rating of 4 to diy titled DIY Fairlady Z Emblem by YamahaR6
-
diyauto1 week ago
- Updated the DIY titled DIY Fairlady Z Emblem by YamahaR6
-
Nice profile man
Posted by stevegolf on 6/20/16 @ 11:40:33 PM