Badev0's Build part 2 - Built 2.0/FF 6266 by badev0

2 minute(s) of a 206 minute read

I added the amber/orange vinyl to the 9 MR tails.

Before

Orange/amber transparent found on ebay for under $10. It's pretty thick. 

Create template 

Cut vinyl then apply water/soap solution to the headlight surface and on top of the vinyl

Get all air bubbles out with a squeegee/vinyl applicator/or credit card. Use a heatgun while doing this if there are any imperfections. 

Done

Now to enjoy some JDM IX tails