1929 Chevrolet International - 4 Door Sedan Project by BearsFan315

7 minute(s) of a 636 minute read

well decided to get started on the transmission...

here is the Transmission Rebuild Kit & New Bearing Retainer I got from The Filling Station (Made by C&P Automotive) also got the new bearings while i was at it. very nice kit, has 2 new shafts, pins, cap & required bushings. 

parts n pieces for the rebuild

Following the instruction in the 1929 Chevrolet Repair Manual, took my time and tore down the transmission.

Here is the initial ROUGH Tear down to bare housing...

housing with internal components

housing looking inside

front view

rear view

passenger side (fill port)

bottom

drivers side

now here are the internals broken down...

shafts, gears, keys, and pins oh my 

now to clean everything down and then prep for rebuild

going to soak and scrub the gears down then inspect them for defect, chips, cracks, etc...

see what it all looks like after some cleaning

well got all the gears cleaned up as well as the housing..

shaft

cluste r

Splined Shaft

cluster 2