1969 GTO Judge Clone LQ4 turbo 4L60e by 2165 Turbo Rail

4 minute(s) of a 76 minute read

***EDIT*** the spacer was perfect but the bolt was too long, i'm not sure if they just sent me the wrong bolt or what but either way it didn't work

I just saw this on a thread by -TheBandit- and decided I'd order the same for my conversion

From Misumi USA (www.misumiusa.com), the spacer is PN KNCLM10-30-20 and cost $5.70. It is nickel plated steel, 10mm ID, 30MM OD and 20MM length. The bolt is PN CB10-160 and cost $2.40. It is M10x160mm length. Total $8.10.

12/16/2010

Got the hot side back from Burleson Powder Coating today.. (Thanks Eric!)

I went with Pewter coating

I also had Eric do the pipe that goes from the turbo to the filter 

I also had the IC pipe polished by a friend in Irving.

not sure whats up with this pic but there is no paint on the battery... my only guess is that its because the pic is from my iphone 4 in HD mode with takes 3 pics and blends them together... weird!

got the battery mounted and secured

12/17/2010

got a little more done tonight

here is the boost gauge that I decided to go with because it matches my rally gauges pretty well

I'm going to put the boost gauge in the far right gauge pod, I think some of the GTOs had clocks there but mine doesn't so its the perfect spot.