Project: Trizz'l Vee Dos.. by n0ftInc

4 minute(s) of a 50 minute read

Made some progress tonight..no camera though, so no pictures. I'll update it when I can score some shots..

Other then that, I received this puppy in the mail today..South Bend OFE Kit. 

..super fast shipping and looks to be top notch. I'm anxious to see how it grabs.

03.09.07

We test-fitted a few of the Non-ABS items in the bay and they fit like a glove..

..all new lines will have to be ran since we closed up the fender holes.

The alternator got a full rebuild and came back in it's saucy black casing..

The head is tapped and all bracketry is installed..I'm still going to be getting ahold of a Dual Idler from C2, but it's for the most part complete. A little polishing here and there on them will be worked in soon..

The coilpack itself is rather not too sharp looking, so it's to be hidden under the SRI. It still needs a little bit of work, but the general idea is there..

The wires are going to have to route down under the SRI, so after going through a few different options I decided on going on something like this..

..it's a rough display, but they will sit flush against the vertical of the valve cover and loop around, two through each opening of the SRI. If anyone has any other ideas of routing, throw them out, I'd love to hear them. They will need to have the Ford plug-ends put on them, so they were measured and will be sent back to Magnecore to be cut and have the new ends placed on. 

03.18.07

A little progress was made over the weekend..

This little adapter came in the mail which adapts the GM Sensor to the thermostadt housing..fits nice and snug.

Then, it was time to mount the transmission up and slap her together for measurements.

..don't mind the dirty transmission and sandblasted starter. They will be recieving attention soon.

..look at all the room back there..hmm. That's how it's going to be kept too. I've decided to kill the heater core hoses that run back there. They just take too much away from the shave,

The front end back together..

Tight clearances make running the stock fans no option whatsoever. No fear,slimer fans are on the way..

..and lastly, the last time you're going to see the Red Sammies in the bay. There's not really a point to butcher such a nice set if you're only running a couple hoses. I'm going to miss them.

..got some more parts on the way.