Project Bunnicula - ITBs Inside by ojeeztutone

3 minute(s) of a 59 minute read

The rabbit just saw 7500 rpm swoot! Thanks to prof315 on the vortex for the insight. 2nd gear rubber here we be. Now i can play with my cam again.

add a 10k ohm resistor in the + side of the crank sensor and adjust the potentiometers on the 'squirt board all the way out. Now i've gotta retard my cam a couple more degrees and and tune in my higher R ranges. Pulls from 4000 up, doesnt drop off at 7500, not sure where it will lol.

Time to tear it all down and clean up everything for next year, progress pics will be up by the weekend. I hope to have everything pulled by then, we shall see. 

11/17/2010

Where I got to in an hour...

11/18/2010

more progress, at this rate i will be broke and bored next week lol.

11/20/2010

now just master, rack, radiator and engine remain. forgot my fluid evacuator so thats all for tonight.

1/30/2011

Vdo millennium 6 gauge set is on order 2.5" exhaust is on hold status. head is at the machine shop for extensive cnc pnp work. Roll cage and brake master and booster are on the docket next. Should have all my parts in the next month and i will post a pic of the mayhem to ensue. Thanks for reading :D:

2/15/2011

Ordering Cage, Coils and Other surprise parts as soon as tax return comes in. Pile 'o Parts to be uploaded soonly! 

2/27/2011

such slow progress!

3/2/2011

Thanks for helping Nick! Rear markers gone w00t! 

3/3/2011

3/5/2011

Current state of disassembly:

Roll hoop:

Base plate welded:

Oh, there's the rest of mah car!:

New skins, mount up: