DIY Fabricating a Dual Exhaust for LS Swap - Lexus SC400 Drift Build Ep.50

Parts Used in this episode:

Speedway Motors Exhaust Kit: https://amzn.to/2LGGmGL

2.5" X-Pipe: https://amzn.to/2RlGdhn

14" Chop Saw for Exhaust (Not the one I have, but the one that I would have gotten if I had more time for sure): https://amzn.to/2Stf1KM

Weld on Exhaust Hangers: https://www.ebay.com/itm/QTY-5-UNIVERSAL-MUFFLER-EXHAUST-FABRICATION-WELD-ON-J-HOOK-HANGERS-BRACKETS/251121444208?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

In this episode, Jeff builds a full 2.5" mandrel exhaust from a Speedway Motors kit for the LS Swapped Lexus SC300 / SC400. This kit costs $150 from Speedway, along with $50 for the X-pipe and around 5 bucks for the hangers. Easily the most economic way to build a full exhaust for your race or drift car.

Just a couple episodes left before the first big debut on track!

Thanks for watching!

NEW! Fully Spooled MERCH! You can buy t-shirts and hoodies to help support the channel here. Every dime goes towards helping me put out more content as quickly as I can:

http://www.teespring.com/fullyspooledmerch



Also check out my Social Media links below!

Website ► http://www.fullyspooled.com
Facebook ► https://www.facebook.com/fullyspooled
Instagram ► https://www.instagram.com/fully_spooled/
Twitter ► https://twitter.com/fullyspooled

https://www.patreon.com/fullyspooled

#speedwaymotors
#sc300driftbuild #sc400driftbuild #sc300 #sc400 #lsswap


_________________________________________________________
Music:

Welcome by CyberSDF https://soundcloud.com/cybersdf
Creative Commons — Attribution 3.0 Unported— CC BY 3.0
http://creativecommons.org/licenses/b...
Music provided by Music for Creators https://youtu.be/t_-FlTAnrWU

Music provided by Argofox:
Rewayde - Shining Waves
https://youtu.be/v2ck4kn17rc