Project Fredybender V2.1 : NA with an attitude for the track by fredybender

By stevegolf
( 4 )

3 minute(s) of a 234 minute read

9-12-2013


Thanks for the comments

Little video of le Circuit Mont-Tremblant from yesterday.
This track takes major steel balls...
I had to quit after 6 minutes of that heat: oil leak & got black flagged because of it.


12-29-2013

At last! Time in the garage!!!
I bought a new computer for my son Gabriel for X-mas, and "stole" his old one so I can have one in the garage. Il ike the set-up !





Since the last 2 seasons were less than satisfactory, I have decided to remedy to the situation.

I have now commited on doing the following in the next few weeks:

Bought another ABA OBD1 block, and will be making it 83mm bore instead, making it 2066cc instead of the previous 2116cc's
New Wossner to be ordered, as sonn as I sell enough steering bearings ; most of my car money tied up in them, at the moment.

Dzus fastened Lexan 3mm front windows will replace the 5mm with slide outs I have presently.

replacing a few heim joints on the front suspension

Cutting the floor boards (foot rests) so I can weld in reinforcement oint the floor where the suspension A arms anchor in the back.

Painting, and installing the fiberlass hood.

Cutting out the front rad support, and making a removable one, like a Mk3.

Changing all the radiator hoses (with hardware type elbows) to braided lines, and AN fittings

A few more odds and ends, but on with pics, or it didn't happen
BTW the phone pics are a lot less better quality, then usual; when I have my real camera...






Comments

Nice job!

Posted by Diggymart on 3/3/19 @ 12:38:17 AM

Nice job!

Posted by Diggymart on 3/3/19 @ 12:38:15 AM