Phoenix Estate Vvc K-Series Diy Subframe Conversion

2 minute(s) of a 66 minute read

A bit more tidying up to do but re-glassing the bit I cut out the bulkhead has gone quite well.

1-16-2016

Nope. Misses is up the duff again, so decorating the house has taken over a bit. I did buy Maximum Mini 2 book and can now see that a properly fitted boot actually looks quite tidy, so I will continue with my plan to sort that out. Need to cut down the tailgates bumper as it protrudes out past the bodywork bulge, etc.
Here's a good one:

And maybe adding a little spoiler to hide the gash roof line. Or at least mocking one up to see if it looks good. A bit like this but smaller.