How to Assemble AN, Push Loc, PTFE, Crimp Style Fittings and Hose!

We get a ton of questions about the difference between PTFE , Standard Braided AN, Push Loc, and Crimp style Hose and Fittings. So we figured we would make a video detailing the difference in assembly, fitting style, line style and more.

Standard Braided AN Line / Hose: Must use Crimp or AN two piece wedge style hose ends. This uses a wedge to lock the hose together with the fitting. Must use rubber inside braided style AN line. Available 4AN 6AN 8AN 10AN 12AN 16AN 20AN and larger in some cases.

PTFE style line 6:30: Must use PTFE style fittings with inner Olive / Ferrule. PTFE line should be conductive style to avoid arcing if used with fuel. PTFE line is much smaller OD than standard braided AN line and can not be used interchangably.

Pushloc 3:10 : Interference barb press on style hose. Not allowed in some classes. Check local rules for usage and legality.

Standard AN braided 13:38

Standard AN braided crimp: 17:00

Shop Fittings and Hose at Motion Raceworks by clicking https://www.motionraceworks.com/collections/fittings-hoses

Shop Motion Raceworks
www.motionraceworks.com

FOLLOW US:
Website: https://www.motionraceworks.com/
Facebook: https://www.facebook.com/MotionRaceworks/
Instagram: https://www.instagram.com/motionraceworks/
TikTok: https://vm.tiktok.com/JjuVejc/