You must be logged in to rate content!
2 minute(s) of a 112 minute read
5-21-2013
Well It wasn't as bad as I thought it would be, once I found all the securing hardware 
There are two 11/32 nuts on the right side.
Four screws securing the bottom edge.
And one little bastard 1/4" that holds the right side vent outlet to the main HVAC tube.
The top is only secured with three metal friction clips.
Just finished removing the main body harness and the trunk harness and now starting to remove all the seam sealer 
Comments
They were huge! My dad had one. 👍
Posted by Diggymart on 1/24/23 @ 5:47:46 AM
Absolutely LOVE this build diary. Read the whole thing top to bottom! Can't wait to see the fully finished project. I sold my Road Runner convertible a while back and now I'm looking for a 1977 or 76 LTC to resto-mod and drive wheels off of! Also following you over at the Lincoln forum.
Posted by mannye on 12/2/18 @ 11:21:02 PM
You're really making me miss the '78 Town Coupe I had 30+ years ago.
Posted by Old_Busted_Hotness on 4/26/23 @ 2:45:42 AM