20B N/A side port street car build from the UK by matt724

By diyauto
( 1 )

8 minute(s) of a 30 minute read

10-17-2013

Coils mounted


Click the image to open in full size.


Another step closer to being on its wheels for the first time in months!
Apexi N1 Pro's


Click the image to open in full size.


Click the image to open in full size.


All 4 fitted but only took 2 pics as I'm lazy!
As soon as my adjustable rod for my push pull converter shows up from OS Giken and my new clutch slave is here I can have the lads round to help get the box, PPF and prop in then drop it to the floor as I hope my calipers will be back from Big Red by then too!
Nickel plated then skimmed RS/RZ larger disks


Click the image to open in full size.


Click the image to open in full size.


Well I'm still working on it!


Click the image to open in full size.


Calipers back from Bigg Red.
Only opened one front so far very impressed!


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Again lazy pics as its late!


Click the image to open in full size.


Click the image to open in full size.


Will be fitting the further modified LIM as soon as its back from the machine shop and doing a full nut/bolt check then it's onto it's wheels! Yay!
In for the last time!


Click the image to open in full size.


Nice O clips on the fuel line


Click the image to open in full size.


It's mega close and might even touch but covered in Zircotec heat management down there it will be ok
Must be 24 anyway this happened!


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.

Bagged this today


Click the image to open in full size.


Got the spot weld drill, hammer and chisel out to make space!


Click the image to open in full size.


Click the image to open in full size.


Finished UIM


Click the image to open in full size.


Start of the EWP and hoses


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


And got material I can sell people that want one too!


Click the image to open in full size.


Click the image to open in full size.


First bit of the water hoses


Click the image to open in full size.


Pics of said hose ...


Click the image to open in full size.

Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


Click the image to open in full size.


The slightly nasty looking bits of coolent hose are there to stop any rubbing on the sharper edges of the shell.
Just got to get a right angle drill now to be able to put the filter relocation kit on the shell and then the oil system is done.
Finished up AST just needs powder coating now.
It's been modded to take the water temp sensor for the EWP and for my temp gauge.
Also had the nipple added for the small hoses at the bottom of the rad.


Click the image to open in full size.



3/8/2014

Bit more progress

Click the image to open in full size.

Click the image to open in full size.


Click the image to open in full size.


Off to WGT so it can be made to live!

Click the image to open in full size.


Click the image to open in full size.


One small progress pic as wirings dull

Click the image to open in full size.


Click the image to open in full size.

Had to pull the motor due to the cracks in the centre plate below


Well it's out!!

Click the image to open in full size.

Click the image to open in full size.

So at 9 I got home with the motor after the re re build and I'm now a happy man again!

Click the image to open in full size.

I'll leave these here

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.



360 fly was the result of today's mapping 20 hp UP on the last car and with less toys!

Roll on a bigger TB later in the year!




Comments