You must be logged in to rate content!
2 minute(s) of a 464 minute read
7-30-2009
7-30-2009
Barry Bordes pointed it out and I noticed it too, it may have been an injector dropping on me(will have to get them flow checked), but it looks more like a fuel pump pressure drop. The power was smooth up to that point and the base map is fat enough in that region. I've been driving this fuel map for a month without issue. Seems rather odd for two major items to go haywire.
9/8/09
Update,
Was working on the front bumper, found a few more holes in the bumper and had to add a few layers to the upper edge to compensate for all the material I've removed. Currently at a stoping point on the bumper until I have made the front splitter/diffuser. So close.
Also still waiting for my new FD chassis to be repaired...
Anyways, here's some pic's.
10/2/09
Alright, plaster molds are being made off of the clay models, so in a few weeks will be making fiberglass molds and start working on making the diffuser/splitter. Already have Jared on-board and asked Memphisraines if he wanted in on the build. Should have finished parts middle of November if all goes as planned.
Nice build!
Posted by Diggymart on 12/10/19 @ 12:54:14 PM