AFGMOTO1978 Build Thread by afgmoto1978

By diyauto
( 2 )

5 minute(s) of a 237 minute read

4-22-2006

Well got more of the car apart, found 7 dolla in change, mostly pennies. Half of them embedded in the sound deadening or cough drop syrup. Found a few grapes and the carpet was wet with what must be 9 year old water. ewww


Dad is formally forbidden to have cough drops or grapes in the car as of now. Will get new carpet from the GB going on, will get black. Order a factory replacement that took 10 months to get.


Okay pics:

Even without the motor the 7's got POWA!

What the back of the dash looks like and the HVAC unit, which is pretty simple.

Long *** engine harness that weighs 30 lbs.

And last, the yummy stuff found under the carpet. 











4/29/06


Update, got the car back from the soda blaster. He did a pretty good job, missed a few things but all in all a good job. Wish I had acid dipped this car actually


Prep and bondo now


Speaking of bondo, I have some unexpected bondo on the driver side rear corner panel. I knew about the bondo on the passenger door. Remove and clean up for new stuff. Hoping the DR rear panel isn't fawked up too bad. Will find out tomorrow

Bodywork turned out to be a majorly long drawn out ordeal - knowing what I know now I would have paid some one to do it.










5/7/06


Found more bondo on the driver & passenger side under paneling. Did some more paint removal, two more days of this and a frame straightening and it will be ready for new bondo and primer/sealer.


I found out my car has a cocaine problem!





Good news, all my one piece ceramic apex seals are good except for the broken one. So, I only have to buy one replacement and a shyte load of other stuff tonight. Yaaa, I need a second Job, Yaaaa. 

N3y2-10-s80 - Housing, Rotor - Rear $529.25 $529.25

1881-11-404 - Seal,oil $1.45 $1.45

N326-11-d03 - Bearing, Pilot $6.00 $6.00

Nf01-11-d54 - Bearing,needle $17.70 $17.70

Nf01-11-d53 - Washer,thrust $5.60 $5.60

N3a1-11-d00 - Shaft $341.40 $341.40

4352-11-363 - Spring, Rear Outer Oil Seal $3.35 $6.70

4352-11-353 - Spring, Oil Seal - Front Outer $3.35 $6.70

1202-11-343 - O-ring, Outer Oil Control $13.00 $52.00

0820-11-341 - O-ring, Inner Oil Seal $6.70 $26.80

Nf01-11-c17 - Spring, Side Seal $4.30 $51.60

4801-10-502 - Bearing, Competition Main $76.40 $76.40

4801-11-111 - Bearing, Competition Rotor $86.05 $172.10

Nf01-11-c24 - Spring,corner Seal $1.85 $22.20

8871-23-180 - Seal Set $54.30 $217.20

N3a1-10-507 - Seal, Front Main Oil $6.35 $6.35

1668-10-556a - Seal,oil $6.60 $6.60

Fd01-56-191a - Protector,pipe $10.35 $10.35

Fd01-43-860e - Insulator,master Vac $52.50 $52.50

B455-32-279 - $5.05 $10.10

P043-27-238 - $4.65 $9.30

P011-25-123 - $2.30 $9.20

1368-25-124 - $1.85 $7.40

E016-50-796 - $1.35 $2.70

G225-51-274b - Lens, License Lamp $4.00 $4.00

G225-51-273 - Gasket $2.05 $2.05

Ea04-51-146a - - $0.95 $0.95

Fd01-50-6g0b - Rr Window Mould $67.45 $67.45

Fd01-50-6ax - Mldg Up, Frt Wndw $44.25 $44.25

Fd01-34-313 - Ball Joint Boot $8.70 $17.40

Fd01-34-213 - Boot, Ball $9.00 $18.00

Fd01-59-821 - W/strip Lt $33.95 $33.95

Fd01-58-821 - W/strip Rt $33.95 $33.95

B455-56-149 - $0.80 $12.80

Fd01-68-601b - Insulator, Hood $109.75 $109.75

Fd01-50-794a - Protector $8.00 $8.00

Ga7b-50-795 - Cap $1.35 $8.10

0118-56-242b - $0.65 $2.60

Fd01-50-640b - Mould Rt, Beltline $78.90 $78.90

Fd01-50-615 - Joint, B/wndw Mould $4.50 $4.50

Ea04-51-146a - - $0.95 $0.95

Fd01-51-674 - Clip $2.45 $2.45

Fd01-50-650d - Mould Lt, Beltline $78.90 $78.90

Fd01-50-619a - Clip $2.00 $2.00

Fd01-69-320c-02 - Sun Visor Lt $59.70 $59.70

Fd01-69-270c-02 - Sun Visor Rt $66.25 $66.25

Hg31-69-220b - $56.10 $56.10

R504-17-470a - Case, Control $51.00 $51.00

Je11-40-355 - $3.40 $13.60

N326-14-151 - Chain $22.80 $22.80


$2,448.00, More to come later.

Pricing for new carpet is $1700 at the dealer, $910 from Mazdacomp. It's so worth it have a membership with them.

More body photos





Comments

Nice build!

Posted by Diggymart on 12/10/19 @ 12:54:14 PM