You must be logged in to rate content!
2 minute(s) of a 464 minute read
9-11-2007
Well not much progress yesterday, didn't have the necessary materials to braze the oil fitting back on, notice the DO NOT EXCEED 30Nm tag, yeah, I wish I noticed that sooner, doh. Will have to go to a rad shop to aluminum braze the fitting back on.
So I read up on Chuck Westbrook's tuning guide, good read if you ever plan on tuning your own car.
9-13-2007
Got a Setrab unit, a lot nicer oil cooler.
I put motorcycle turn signals in the oil cooler duct on the plastic fenders; this will show a little light through the vent, which should look pretty cool. Spyder and I hashed that one out.
And I made a pretty big mistake somewhere in my wiring, will have to take the harness out and do a check, I have a feeling its two simple wires that Ive crossed that goes the ecu that causing all my problems. Stay tuned to starting this bitch.
9/14/07
I made the accessory mount bracket last night for the BOV control valve, Spal fan controller and my modified relay box. Off to paint it goes to get a nice high gloss black finish.
Nice build!
Posted by Diggymart on 12/10/19 @ 12:54:14 PM