You must be logged in to rate content!
2 minute(s) of a 464 minute read
9-18-2007
After looking at the wiring harness, it looks like the wiring was correct for the engine control, but I was getting excess current draw from the added accessories and was popping a few fuses along the way. I did have other wiring issues though and after reading Chuck Westbrook tuning guide I relocated a few things per his recommendations. So I rerouted some wires, fixed a few leads and relocated the secondary injector controller for better access. Hope this will be it. Oh, and I didnt have my leading coil plugged in, that explained why I wasnt getting spark, Doh!
9/19/07
Well with a jump and a little cajoling with the starter, she RUNS!!!
Welded in the new air temp sensor bung and in the process of checking everything before I do the final wiring harness wrap. The fan setup I have is pretty effective, may go one step further and put fans on the oil coolers. Enjoy to vid.
http://www.streetfire.net/video/its-alive_134520.htm
Nice build!
Posted by Diggymart on 12/10/19 @ 12:54:14 PM