You must be logged in to rate content!
4 minute(s) of a 464 minute read
10-16-2007
Alright, dash is in (thanks to the help from Mitch), wiring complete, added an accessory outlet plug in the glove box (like to F-up plug above it?) and will be modifying the glove boxes strike to get rid of the annoying gap present on all 93's. Also started installing the Race Shop roll bar, unfortunately all the hardware that went with this kit is MIA, so I have to source equivalent replacements. Had a massive migraine yesterday; felt like I was going to puck every time I moved; no fun.
10/17/07
Glove box striker modified, Roll-bar installed (will need to remove to install the rest of the interior), it was bit of a jigsaw puzzle, but it's in, and started figuring out how the Sparcos will fit and be setup.
10/17/07
The Sparcos are super tight and the stock rails will not work. Will have to modify the door panels for sure and maybe the kick plate, seat belt buckle will be an interesting one too. The seats will have to be solid mounted, I will need to find an alternative seat belt bucket (which I have an idea were I'm going to get it from ) and my knee still hits the steering wheel when do a heel-toe operation , I'm thinking the Nardi wheel will need to be made into a D wheel later this year.
10/18/07
The pictures I've attached that shows the side blinkers in action really don't do it justice. It looks way better in person.
10/21/07
While I was finishing buttoning up the engine bay, I went ahead and added check valve bypass filters to the BOVs on the currently non-utilized pop-off fittings. Don't want contaminants to get in there.
Got my rear Tein EDFC stepper motors in, it's going to be a tight fit with the cage, but it will fit.
Front bumper is on and starting the process of painting the sleek headlight lens, once I get a contour I like finished.
Nice build!
Posted by Diggymart on 12/10/19 @ 12:54:14 PM