You must be logged in to rate content!
2 minute(s) of a 84 minute read
2-28-2011
I had to change the direction of the line coming off of the AC condenser coil and after failing to find a shop willing to do it, I decided to go ahead and give it a shot. I was really nervous to try to tig that line but I managed to get it done without blowing a hole in it. It even passed the leak test!
Here's my home made tubing bender.
The tube I bent on that wonderful bender 
And the finished product with the really ugly welds.
3-1-2011
I couldn't bring myself to put the ugly, plastic, stock oil filler neck back on so I decided to fab my own since the aftermarket ones out there are so overpriced.
Here's the flange I just finished making with my trusty old DeWalt drill, jigsaw, and hole saw. Hopefully the elbows will be here in the next few days.
Wow nice build with plenty of pics!
Posted by Diggymart on 2/17/20 @ 9:11:59 PM