e430 Endurance Racecar build by WOT-Tech

2 minute(s) of a 17 minute read

3-11-2016

Test fit some junk yard scored today. The front bumper actually was sold at the same yard and had paint pen markings on it from 2014 lol.

3-18-2016

In case anyone needs one, "Jags That Run" sell an adapter flange for the MB diffs that allow a domestic Dana yoke to bolt up. This makes the drive shaft a simple lengthened from an F-Body.

Got the Quaife today and the 3.07 should be here by days end as well. Local drive shaft company is making the drive shaft.

Shifter has been modified with a steeper angle to be comfortable with the driver.

This thing should be moving under it's own power soon

3-26-2016

Started with cardboard for a template, transferred that to Lexan so it's see through in case any holes have to be moved. After 2 Lexan prototypes, we are ready to reproduce in steel. These are 4 30mm piston calipers with twice the pad surface and we upgraded from the e430 solid to e430 4Matic rear vented rotors in the process.