IT RUNS!!! - My 500whp build - Element motor and Moore Performance Twin Scroll Kit! by dexterous

2 minute(s) of a 312 minute read

The install is well underway. Here's a teaser pict:

6-18-2016

Here's the results of my fender flares project guys!

Front fender cut, sealed and prepped:

Here's the car just after loading it up from the shop. I obviously wont be running the factory wheels with this setup but you get the idea:

I am going to run a 5MM spacer to help with suspension clearance but they haven't arrived yet. This pict should give you a good idea of the final product though. Notice the black rubberized trim piece that sits between the fender and the flare. I opted to have this added as a cushion because my car us used primarily for track days and the theory is that it will add to the durability of the non-factory body piece.

6-26-2016

Check out the custom hub centric spacers that I had made to go over the 53mm Subaru hubs, push the wheel out 5mm and go under the 72.6mm aftermarket wheel!











Here's the final product: