Project AE86 aka the never ending project by marley4us

2 minute(s) of a 225 minute read

Here is some info to help others do LED tails for them self

After you have your tails apart and mounted the leds, here comes the wiring. 

Supplies:

Crimper

wire cutter

Diodes 3amp 50piv

resistors 220ohm

male bulb with 3 wires

here is a pic of it wired up for high and low beam

take the two power wires, for high and low beam. put Diodes on the (make sure to have them facing the direction you want the current to flow)

On the low beam wire, put a resistor on it. 

Connect highbeam to high beam

low beam to low beam

and ground to ground.

Boom your done 

Some pics playing with the track rims I have laying around