The return of old white shitty by NashMan

2 minute(s) of a 31 minute read

shit just got real



new toy to help build my car

10-26-2013

@50 we have a nice number of 236.7 dur and peek lift is 411 (10.4mm) (stock is 201 @50 and 7.54 of lift)

this is with cam gear what ever that means cause there are 2 spec's

so really these are really high rpm cam shaft and will be perfect for the 9000 rpm motor I am building

now there so much over lap that i wounder if i might need to use a vacume pump

for fun here is he biggest cam for the 7mgte by brain cower

http://www.briancrower.com/makes/toy...rd/bc_0322.pdf

dur @ 50 is 226 and peak lift is 8.6

brain cowers full blow race cam for the 2jz

http://www.briancrower.com/makes/toy...rd/bc_0303.pdf

@50 232 and a lift of 11.48




so ya these cams are pretty big




you will have to duble click to go to photo bucket then you can zoom in from there

on a side note i pulled the 4 seats out of the head and I was shocked on how shitty of job the repair was who ever installed the seats did not put a chamfer on the seat so when there were installing them it carved abit of alum and made it pile up under the seat

plus how the hell can you get good interference fit with out chamfering the bottom of the new seat

in the end I could see that seat falling out over time

here some pic's