ISF4Life Builds by ISF4life

17 minute(s) of a 181 minute read

11-28-2012

Look what came today at my work lolz

11-29-2012

Up date some pictures 

More to up date  

12-1-2012

Installed earlier today 

12-3-2012

12-4-2012

up date  is on the way . 

12-5-2012

No i had someone with the lift and the right tool to do did it, and i was helping 

12-11-2012

Just installed right about now 

Yes sir 

12-22-2012

After 2 weeks in U.S custom finally is arrived today  will install tomorrow 

12-23-2012 Thanks , here some pictures taking today after the install the jdm turn singals. iphone5 is not bad pics 

1-26-2013

Here are some more carbon fiber parts to come lolz. A special thank you to Joez (Joez performance ) for his carbon exhaust tips  and also to Taku Watanabe from Novel for the carbon duct panels. It on the way from Japan  He just tested fitted for the U.S ISF its fit perfectly. 

2-1-2013

What came today  lolz few pictures with my iphone lolz,. Thanks to your Joez and Taku 

2-2-2013

Thanks guys, here are some pictures after install and cleaned up lolz 

T gasket or lining , it comes with Tom's black and silver colors so u have 1 options for which one matches your car for the carbon exhaust tips , it really depend how u take care it, clean it often and wax it, prevented from yellowing , that goes for any carbon fiber stuff and melt depend on how they abused lolz . I know Joez in person and seeing how his drive his car lolz, and his tips to this day still very good condition :P .

Here are few pictures earlier today from Namster pix's  Thanks again ku 

2-13-2013

Up date as today  LSD 2010

2-14-2013

ahahhahahaha u guys are nuts lolz. Here are a few pictures picking up LSD tonite , Thanks to Sam for the LSD and Congrats on another F 

2-23-2013

Here is the up date as of today , installed the 2010 LSD. Dennis the great mechanic did it less than 1hr and 30 minutes  My differential was still pretty clean only 30k , but the magetic bolt was pretty dirty. Bought 2 of the Mobil1 LS 75w-90 only used 1.5 and some over filled like Joez says  My gaskets are still pretty new and reused it. also thanks to Joez and David  . It felt different , it has more grip to it .had a bit of test drive and dinner after work with David lolz. Here are some pictures 

3-4-2013

New daily beater lolz , got this last nite. Custom RedLine Bike Pro lite. Commute to work about 5 miles lolz. This is how i got to work today  

3-13-2013

Just a bit up date 

3-15-2013

Thanks to airtvec, i just email 3DDesign about these vents, has the rain gauge too, hopefully they have in stock and ready to shipped 

Here are few more pictures from airtvec , up close

3-18-2013

Ah, thanks to amgone75=David got for me JDM keyglove for the F  hopefully he can find ISF racing gloves lolz

3-26-2013

Some pictures were taken by Jacob at Socal all ISF meet over the weekend 

yeah he is, here are some pictures of Quarius skills 

4-4-2013

Look what i got in the mail today , vents kit is here  will cut the hood this weekend  

4-7-2013

Up date so far , dropped off the car last nite at my good friend shop at Platinum Vip. Plans are cutting hood with templates from 3DDesigns , sanded the vents kit carbon fiber with 1000 grit sand paper and clear coat with urethane to prevented from yellowing and high heat content. Next step will bonded underneat the hood, will sanded around the egdes of the openning and spray touch up match painted around it. Will have some pieces of tiny Tom's liner string around the edges will pick up the car Tuesday nite or Wednesday . Will post pictures 

4-9-2013