You must be logged in to rate content!
2 minute(s) of a 31 minute read
10-27-2013
So I decided to steal CalitriSC's wheels lol and put them onto my car just to see what it would look like. I am very tempted now...
ORIGINAL:
1-9-2014
I finally got around to replacing the reflectors with LEDs so now it looks much better and functional. I also just got the Wald diffuser. Better/proper pictures will be uploaded soon.
1-13-2014
You will find a black grommet that will allow you to feed the wiring from the reflector to the brake light harness.
You will see on your tail lamp harness three wires (green, green/white and black/white)
So the wiring goes
Tail Lamp Harness <---> Reflector Wiring
Solid Green <---> White (Enables Running Light)
Green and White <---> Red (Enables Bright Mode)
Black and White <---> Black (Negative)
I even took the liberty in wiring the reflectors on the Wald diffuser too lol It might be excessive, but at least people will see when I brake.
I found them online, I measured the reflectors and they are 2.25" which are the same size as the Toyota Sequoia/Highlander reflectors so I found a that there is a set of SMD LED reflectors that are made for the Toyota Sequoia/Highlander so I just swapped them and wired them up.
Nice! I’m on my second Lexus really like them
Posted by Diggymart on 3/23/20 @ 5:51:41 PM