You must be logged in to rate content!
3 minute(s) of a 718 minute read
6-14-2011
6-14-2011
Sorry guys...I have been real busy lately...Here are some of the pics...If you have not modified your front end or added a FMIC, you should not have to do what I did.
Stock front underbody louvered panel. This panel directs air up into the air chamber behind the front air duct and air dam, but directly towards the lower half of the AC Condensor and Radiator.
Side by Side comparison of the cut one, which I used to add to the stock one for the added length needed to attach this due to the FMIC protruding below the level of the front bumper cover.
Modified panel after riveting the 2 pieces together. perfect fit, and it works! Plus, the rivets ensure it will stay together...Do it right the first time!
Spacers added...After test fitting this, I added 2 more on either side of this one located in the center...These actually rest against the bottom of my FMIC, and keep the bottom of the panel off the FMIC, and the louvers are fully functional this way, so that they not only direct air up befind the center air duct, but they also direct air up to the lower front area of the intercooler too!!
The other panel is the flat one that covers the whole underside of the engine, and has the fold out section to fold down when changing your oil filter, and works in conjunction with the front louvered panel.
Here are a few pics from my most recent test drive:
