You must be logged in to rate content!
4 minute(s) of a 718 minute read
2-3-2008
Well fellas, we just completed a marathon session of wrenching on the engine...Worked all night on it, qand am going to get some shut eye for now...It is basically done. Got all the wires separated on the loom and recovered them in black flexible loom tubing, then taped over them with high temp electrical tape. We assembled the front of the motor, and installed all the accessories. Need to regap the plugs and install the plug wires and covers. A few moe cosmetic things to complete as well. The rails are installed as well as the injectors, and it does look hot!! Still need to connect the SS braided hose and the fuel system, but made fantastic progress.
Pics to come,
2-4-2008
I have the complete 97-2000 refresh being installed. One of the nice things about the BW Lip is that it onl sits approximately 1/2 to 3/4 inches further down fro the stock 97-2000 lip, so it flows very well with the 2000 refresh. No need for any other kit pieces to add to the car. Yet the lip really adds to the agreesive stance of the car. I really like it...
Thanks, Richie. Pics coming up tonight.
Hello Gang:
I promised updated pics of the build, so here we are. I know my car is not running yet, but it should be very soon. Making excelent progress, and I look forward to finally getting this car on the road. The rails and injectors installed very nicely, as well as the Lexus Logo that I "Chiseled" off the stock intake and then attached to my polished and ported intake. The wiring loom was time consuming, and we re-routed much of the wiring, we even had it set up for hidden wirning, but the rails were made such that we could not turn the injectors in and therefor, we had to show the injector wires. We installed most all the accessories, and bity do they look good, that polished and chromed metal sure has the right "Bling". 
Take a look:
Injectors installed:
A close up injector shot:
Rail shot 1:
Rail Shot 2:
Rail Shot 3:
Intake and Injector wiring shot 1:
Intake and Injector wiring 2:
More to come.
Continuation:
Intake and injector wiring shot 3:
Intake and injector wiring shot 4:
Intake and injector wiring shot 5:
Motor shot 1:
Motor shot 2:
Motor shot 3:
Removed Xtremeboost "BS" Home Depot "Special" High pressure oil feed:
Replacing Bull**** oil feed with this High quality Billet one:
I am excited, I am excited!!!!!!