71 Cuda Pro-Touring Build by johns cuda shop

2 minute(s) of a 81 minute read

Working on removing the transmission tunnel for the T56. More pictures to follow shortly

4-21-2011

I cut the transmission tunnel out today. My focus is to get the transmission up into the tunnel and keep the driveline angle at -01 degrees .I will make up the trans crossmember after I install the motor. more pictures at http://s1187.photobucket.com/albums/...uring%20Build/

4-24-2011

Hello, I used a Wilwood 1 1/8 bore master. From what I seen a 1 inch or less would make the pedal more touchy. On the Throw out bearing, I bought a whole kit from keisler ,instead of trying to find all the right parts to make it work. I'm running a Ididit column ,I plan on installing a EZ wiring universal 8 ciruct harness .The hydroboost plate I made myself on my mill they are 1inch thick and can clock the hydroboost unit at 180 .I made them to fit the firewall of 70-74 Mopar e-body and 68-72 b-body I made 4 extras to sell they are available at http://www.custommachinecomponents.c...at=Mopar+Parts My company makes lots of unique prototypes (mostly specialty tools for vintage cars) Having this equipment is a plus