1970 Camaro-Purpose Built Auto Cross by Mac&Otto

2 minute(s) of a 35 minute read

Here are some pis of the car after blasting. I replaced the passenger side rocker, built a small piece for the bottom of the quarter and replaced the drivers quarter skin. The trunk is in and window opening(verticals on sail panel) is also in but needs welded up. I wil post more pics this weekend.

The rocker was fairly easy but these small patches in front of the wheel open were more work than expected. It's layered and has a heavier gauge inner structure that also ties in to the wheel well lip.

The quarter wasn't too bad except, as everyone knows, the aftermarket panels are never a perfect match and trusting reference points on the panel to make final cuts is a little time consuming.

One more.

12-13-2013

I just came in from the shop and here are some new photos. I put in a 10 hour day today and it seems I didn't get anything done.

The front stub is assembled just received my third member.

I installed all the cage mounting plates and got the back half all tacked in.i also finished the passenger side flange for the wheel tub and plan on finishing up the drivers side tomorrow.

The drivers side tub is in and fit but needs to be removed and the interior flange needs welded in. I also have the cage plates plug welded to the frame rails.