Replacing ignition

By diyauto
( 3 )

3 minute read



 We started by replacing the ignition, the wheel was locked so we started by taking off the wheel.

Pull off the center cap to access the wheel nut, it’s 21mm. Remove clip first.


Remove but then use steering wheel puller to pull off wheel.

Pull off plastic cap.

Access the locking guide and remove the Phillips screw.

Remove 3 torx bits that hold the plastic assembly.

Unclip wire and pull assembly.

Remove the one screw and pull the ignition.

Replace with new.



Comments

Wrench away!

Posted by Diggymart on 11/5/18 @ 1:19:48 AM