C5/C6 Chassis Build for my C2 1964 Corvette Roadster Resto Mod About to begin!!! by Vetterodder com

3 minute(s) of a 65 minute read

Here are a few additional pictures of my C6 chassis build for my C2 RestoMod from Street Shop. It is coming together nicely....


Transmission cross member being constructed

Rear clip is on - along with rear body mounts

Transmission cross member is installed

All that is left to do is the rear shock mounts and it comes off the jig, and finish the underside before it goes off to powder coat.

7-17-2012

 
Here is my C6 Street Shop Chassis after it has been removed from the jig. I can see that more gussets, the side pipe / brake line tabs are now installed as well as the front sway bar mounts. At this point, the chassis fabrication is completed. Bolts will be placed in anything on the frame that has threads in preparation for powder coating in the next week or so.
What’s next?
I have contracted Street Shop to build the complete rolling chassis as many of you have seen the extensive list of parts at the beginning of the thread. All the parts have been ordered a few weeks ago so I will assume that many have already arrived or will be arriving while the chassis is off to powder coat so that when it returns to the shop, the assembly process will begin.