NSX AUTHORITATIVE "Double DIN" everything you ever wanted to know thread build by EuroBoutique

3 minute(s) of a 12 minute read

Entire dash taken apart ready to do install - removing the steering wheel makes dash access much easier

(*only reason we removed the wheel is to install our carbon fiber steering wheel for this client. No need to remove it if you are just doing the stereo install)

6-15-2016

Here's a full double DIN install for a Pioneer App Radio (SPH-DA120) into the NSX using our FRP (ready to paint dash panel).

This allows the customer to retain their OEM dash panel should they ever want to go back to stock finish.


This is how we started:

Remove the center vent / clock assembly first to gain access to 1 of 3 screws holding the dash panel in place:

This is what the back of the ashtray looks like, 2 plugs need to be removed:

Here's a list of parts you should have removed, now you should be ready to start doing the wiring:

Note where the stock radio tabs are on this car since it's on the top and bottom, not the SIDES like most double din installs, we will utilize the stock points to mount the new radio: