The Wifes Worst Nightmare 83 Full Resto by Minidarren83

By diyauto
( 3 )

4 minute(s) of a 192 minute read

5-2-2016

The decision was made to pull the engine out after looking at the state of the oil

20160408_144111_zps8iuwy2mp.jpg

And out it came

20160408_163326_zpsuhmt8tzk.jpg

The next step was to rip apart my daily zr turbo for the engine

20160410_173253_zps3qbasqqb.jpg

20160410_233421_zpstdbpfpfo.jpg

This gave me the chance to fit my PTP lightweight flywheel and a new clutch kit

20160411_020027_zpsna6g2opi.jpg

Then in the mini

20160411_123006_zpsgc5dstti.jpg

All fitted back up with the front end back on

20160412_195230_zpsc3mdjikf.jpg

And all done ready for work 28ish hours later after I started

New headlights too

20160412_211117_zps3u2rqjrb.jpg

Made it to work the next day never made it home

20160413_174147_zps5wdcl7bt.jpg

20160413_182209_zpsbqacbvjz.jpg

I plumbed my turbo water feeds I'm wrong but all fixed now


All fixed and running sort of ok I headed for a dyno day with a ford owners club i told them I have fiesta brakes so they let me go

20160424_113931_zpsmcbkxkfi.jpg

20160424_114657_zpswbarwmn6.jpg

20160424_120143_zpsfcjxgp5c.jpg


And now fully up to date as the weather was lovely today I gave it a good wash

20160502_161442_zpsyd9oryzh.jpg

20160502_161428_zpsqxssbttm.jpg


5-8-2016

Small update the car was never running right it would boost all uneven and the manifold would not stop blowing

So had the manifold skimmed and works a treat

20160504_170834_zpspcmx2yjj.jpg

Then fitted a new genuine mac boost solenoid

2016-05-08%2022.21.01_zpsaezuate4.jpg

Then took the car for a blast to see if that was the boosting problems sorted and it has very smooth delivery and faster than I need it to be. Then my car was so happy to be running good it did a little sex wee

20160505_183828_zpsjbwytg1w.jpg

My new tyres also turned up getting them fitted Monday

20160505_174014_zpsjft9ry49.jpg


5-11-2016

New tyres are on and I love them and started on my rose jointed tie bars just need to cut and thread the bars

20160509_161509_zpsu5mbih6d.jpg

20160511_124257_zpsuegunz7g.jpg


Comments

Wow what a build!

Posted by Diggymart on 1/17/20 @ 10:10:34 PM