You must be logged in to rate content!
2 minute(s) of a 241 minute read
2-11-2016
Today job was to install the dual fuel pumps, for now i'm using just one, will connect them once i redo the entire system, so first started to make the car levitate, also made a good ground to the pumps and to the diff, so the temperature sensor is installed will work properly, this is how i purge my fuel system, the right fuse is for the pump removed the fuse and connected +12v to the right side of the fuse, no leaks, idling smoothly.
2-12-2016
Today started by making "the list" all parts that i will need for the conversion, for starters will need to make a big shelf for the parts.
2-13-2016
Today all my plans got delayed, the garage is getting its heating system install, unfortunately may take a month or two before i can get my garage back and start the real work, i'm still going to post daily up dates on parts that how they arrive.
2-14-2016
Today spend half a day moving, reorganizing (making a mess) my spare parts to make room for the heating equipment, the good news found some parts that i forgot about, more tomorrow.
