89-97 FORD THUNDERBIRD SHIFT BOOT INSTALLATION INSTRUCTIONS

By diyauto
( 1 )

2 minute read

Shift boot store


89-97 FORD THUNDERBIRD SHIFT BOOT INSTALLATION INSTRUCTIONS


1. Remove shifter knobs by turning counter clockwise. Remove two screws in rear of console.

2. Lift console up and remove it from the car...

3. ... make sure you remember to remove those connectors while you are doing it!

4. Flip the console upside down on a working table, unscrew the bezel clamping the stock boot to the console.

5. Install the RedlineGoods shift boot instead of the stock one.

6. Reinstall the console into the car following steps 1-3 in reverse order.

7. Reinstall the shift knob.

CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!

Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.

BUY THIS PART HERE!

Powered by Froala Editor


Comments