ARMREST COVER INSTALLATION Explorer 95-01

By diyauto
( 1 )

2 minute read

Shift boot store


ARMREST COVER INSTALLATION Explorer 95-01


1. Remove the armrest by taking out the three philips head screws.

2. Remove the 9 small phillips head screws that are holding the black plastic cover on the armrest.

3. Pull the staples out of the vinyl that are holding the cover to the foam arm rest and remove the vinyl cover but leave the moisture barrier cloth on the armrest.

4. Place the leather cover over the foam pad and put the black plastic cover back on the armrest. If the plastic cover is cracked you may to use some self tapping screws with a larger head to secure the cracked plastic to the armrest.

5. Tighten the 9 screws back on the plastic cover.

6. Put the armrest back on the console and secure it down with the three screws that hold it into place.

BUY THIS PART HERE!


Comments