1929 Ford Coupe-Rusty to Solid by Flop

4 minute(s) of a 20 minute read

this was a random hole cut here where there was a body mount 

had to patch it before i put the subframe in 

the subframe was cut to close to the brace so i couldnt clean up the weld nicely. so i cut out some of the new subframe so i could achieve that 

and the new connection 

put a patch in this riser .no sense on getting a repop when only 1 tiny section was rotted out 

got it all smoothed out 

this piece in my opinion this rear panel below the decklid is the biggest pain to get out of an A

after i got it out had to redrill and tap all 8 screw holes in the rear subrail

well up front to a rotten door pillar

a little brace so i can fix the bracing 

bent this up made the step with a bead roller and all welded up ready to get covered in sheet metal!!

well got the quarter patched and the wheel well a quarter of the way in 

i also wonder why they make the patches so horrible ? i mean come on almost a quarter inch short isnt from die wear!!

got the quarter squared away today 

and heres a few holes of what was left after the patch was in

and this is it all finished up