You must be logged in to rate content!
2 minute(s) of a 14 minute read
4-29-2019
A little real time video of cutting a 1983 civic front end off in less than 5 minutes.
4-30-2019
In this segment I weld a 1998 Integra GSR front chassis to Project 1983 RWD Civic and it all fits under the stock fenders. Its dirty and a little sloppy but it will work and be better that the stock 1983 junk. As there are many parts available for newer civics and integras, the front chassis and suspension from one is the easiest and most logical choice to make this car handle and stop like a modern car.
5-9-2019
In this video I make a floor pan and add more structural reinforcement.
5-16-2019
Project civic gets some panels fabricated to fill in the holes that were cut to make the Integra front chassis section fit. But don't worry there will be plenty of grinding.
5-21-2019
In this episode I install the J32 and a 6 speed manual gearbox in the 1983 Honda Civic. This is a small milestone in the journey to build the Ultimate Group B rally tribute Honda.
This is going to be sick! There was a widebody Civic on BAT a few weeks ago that looked awesome. really looking forward to seeing how this comes out. https://bringatrailer.com/listing/1984-honda-civic-5/
Posted by stevegolf on 10/29/20 @ 1:26:10 PM