By diyauto
You must be logged in to rate content!
2 minute read
2000+ S2000 SHIFT BOOT INSTALLATION INSTRUCTIONS
1. Remove shift knob. Begin by gently lifting front corners of center console .
2. Disconnect convertible top and hazard switches.
3. Remove screws holding switches to the console.
4. Remove trim rim and shift boot by sliding all tabs around trim ring out of the center console.
5. You now have the trim ring and shift boot removed. Simply lift up on the boot to slide the old boot off the prongs holding it in place. Align holes punched in new shift boot to line up with pegs on shift boot trim. Insert trim ring back into console so it snaps into place, and reverse all steps to re-attach console.
Read the Full Article:
https://www.redlinegoods.com/S2000install.php