You must be logged in to rate content!
2 minute(s) of a 140 minute read
11-15-2010
I finally setup the car for the quarters removal. Leveled the car, took many measurements and put the jack stands under the rear axle. I tack welded in a brace across my trunk divider, since there is no trunk divider.
I then changed my truck lid. took it out the box for the first time in 15 years. Major disappointment. Bad dent in driver side corner. Tried to fix it and did more damage.
Then i started the removal of the patches I already fixed on the passenger side quarter.
After the patch removal I started on the full quarter removal.
Today I had to do some blood workup at the doctor's office. It was also raining pretty good this morning. I am about to go back out in the garage and start the removal of all the metal i left from the quarter removal. I just cut close to all the edges. Now the fun part of drilling out all the spot welds and cleaning up the metal. Will have more pics later.
Comments
Coming along really nicely! The color is beautiful!
Posted by MPower on 11/25/20 @ 10:40:33 PM
Cool car!
Posted by Diggymart on 3/30/21 @ 7:46:54 PM