1929 Chevrolet International - 4 Door Sedan Project by BearsFan315

2 minute(s) of a 636 minute read

well all 10 sets are molded and curing...

decided to do a test and clean up a set, earlier set.  i removed the flash & funnel by using a razor blade. then went back and used my dremel with a small sanding wheel to see if i could clean up the edges a little. then tried to see if i could sand a flat face to remove the grooves from the mold, and it came out nice and smooth. takes a few minutes of sanding but you can make them smooth. it does remove the sheen. but still looks like black urethane

majority of flash removed along with funnel

outside edge sanded

inside edge sanded 

front face sanded smooth