You must be logged in to rate content!
2 minute(s) of a 148 minute read
9-27-2011
9-27-2011
On Friday I got my other parts from rx71king... guy does excellent welding as I stated before and works super fast. I mocked up my wastegate dump tube and I had to hack the DP and adjust the angle and add my Wideband sensor bung (added it right at the bottom of my DP)...
The Dump tube!
The whole DP with the new cut angle!
New Bung holio!
Saturday was my goal day to get the car all done! I was far from done! and now even more frustrated! I now took off from work on Friday to go to my garage and work on the car to try to wrap it up. I am hoping it all goes smoothly. but Here is a pic of the turbo back off and all my fittings for my oil and coolant for the turbo! all I know is that AN hose ends are a B!TCH to get on, the -4 was ok the -6 was a bit harder and the -10 was a PITA.
At the end of the day all I got was the turbo back on and the drain in... BUT of course I miscalculated and the line is at a weird angle and touching the manifold... so I need to loosen it up to move the 45 angle the other way! =(