- 2 - 10MM Ball Stud Bracket - Flat
- 2 - 10MM Ball Stud Bracket - L shape
- 2 - Gas Struts #4800
You must be logged in to rate content!
3 minute read
Gas Charged Hood Prop
Compliments of randykieling @ mgexp.com
I added gas charged struts to the hood because i did not like the prop rod.
2 - 10MM Ball Stud Bracket - Flat
2 - 10MM Ball Stud Bracket - L shape
2 - Gas Struts #4800
Mount the lower L brackets using the holes for the rubber hood pad on the fender.
the flat brackets will require drilling through the hood brace
i did not know what shock to use so that took some trial and error. after more than a few trips to the local parts house i found the correct length and charge. the struts are for a 79-87 280ZX rear hatch.
total cost is less than $50
not a mod for everyone but i thought i would pass it along
sorry my car is a dirty mess but i built it to drive and enjoy.
10MM Ball Stud Bracket for Gas Prop/Strut - 4 Pack by Gordon Glass Co.
i just took a BFH to a couple of the L shaped brackets and made them flat
i added struts to the trunk lid also with a electric release
Add a pic
I do it to all my midgets