My 1975 Trans Am build


( 1 )

I'll slowly add to this but currently the progress puts me at reinstalling the 1997 Camaro t56 6 speed.

I'm using a rebuild 1970 455 HO that has a little work done on the inside.

The car is a factory 400/th350 car that was converted to manual and swapped over to a 455 bored 60 over.

the previous owner changed to a later axle with the disc brakes in the rear, I upgraded to polyurethane body mount bushings and cleaned up everything that came off to swap over to the 455/t56.



Comments

I can probably go through pictures though as I got it to the point it kinda ran and started etc but had issues that then I didn’t know how to sort. Unfortunately I noticed when I was back out there an animal started eating my clutch reservoir bottle. Might be time to replace it with something metal.

Posted by Cuttyman9 on 5/12/20 @ 3:10:14 PM

Unfortunately No, it’s stored at my parents. I’m trying to sort out a few other projects and build some covering for it at the least so I can start to work on it again.

Posted by Cuttyman9 on 5/12/20 @ 3:08:46 PM

Any updates?

Posted by detroitheaders on 5/12/20 @ 12:46:58 PM

Cool! Following for updates/pics :)

Posted by diyauto on 8/2/19 @ 12:31:45 PM